 |
|
|
|
|
|
|
 |
 |
 |
|
|||
 |
 |
 |
|
|||
 |
|
|||||
 |
 |
|
||||
 |
|
|||||
 |
|
|||||
|
|
|
|
 |
|
||
 |
 |
 |
|
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
 |
|
||
|
<< BACK |
|||||||
SIF
STATIC INTERCEPTÒ FOIL DRY PACKAGING BAGS
Low outgassing (Anti-Static Top Coat) Foil Moisture Barrier
Foil – 2 layers of 48 gauge PET each metallized (pinhole free material) laminated together
Static InterceptÒ was developed by Lucent Technologies Bell Labs to provide permanent, humidity independent ESD protection coupled with the state of the art in Corrosion protection. This dual functionality of the Intercept material is one of its revolutionary aspects.
This material protects against Non-Ferrous, Ferrous and Galvanic corrosion. Corrosion protection provided for 30 years - perfect for part storage or shipment of parts across oceans or in places with high levels of corrosive gases. Corrosive gases can easily migrate through traditional Dry Pack Bags -- only Intercept prevents these corrosive gases from migrating through and corrosion that Bell Labs found caused most latent defects.
SIF - Static Intercept Bags are humidity independent – most all other Dry Pack Bags use volatile anti-stats as their inner layer. These anti-static materials depend on moisture to work. Only Intercept will provide ESD protection at humidities less than 10% (<5% RH is normal for bags with desiccants). When the inside of normal Dry Packaging Bags dry out they stop working. |
Moisture Proof MVTR Less than .001 gms (<0.001 gms average on bags) Meets Mil B-81705C and EIA 583 Type I Moisture Requirements
Vapor Proof Sulfur penetration (0 cc) Chlorine penetration (0 cc) Ozone transmission (0 cc) Oxygen transmission (<0.04 cc) Gas transmission (<0.02 cc)
Grease Proof No volatile oils used
Superior ESD Protection Greater than 99% attenuation
Meets Mil B-81705C Type I Electrical and Physical Requirements
Meets EIA 541 Dissipation, Charge Generation and Conductivity Definitions and limits
Superior EMI Protection Greater than 45 dB (1-10 Ghz.)
Does Not Outgas Meets NASA Outgassing specification
Long Shelf Life
Reusable Intercept is permanently static dissipative
Corrosion Protection Even on sensitive metal to metal interactions
EMI 2000 |
||||||
SIF
STATIC INTERCEPTÒ FOIL
DRY PACKAGING BAGS
Characteristics |
Test Method |
Typical Values |
PHYSICAL PROPERTIES
Tensile Strength |
ASTM D-882 Method A |
MD 8,000 lbs / in TD 9,200 lbs / in |
Burst Strength (Mullen) |
FTMS 191-C Method 5122 |
>1264 psi |
Elongation at Break |
ASTM D-882 Method A |
100% MD 67% TD |
Tear Strength |
ASTM D-1004 |
21.1 lbs MD 15.6 lbs TD |
Puncture Resistance |
FTMS 101C Method 2065.1 |
> 34 lbs |
Seal Strength |
ASTM D-1876 |
> 9 lbs / in width |
Light Transmission |
ASTM D-1003 |
Opaque <0.01% |
Total Material Thickness |
ASTM D-2103 |
4.3 mil |
BARRIER PROPERTIES
Oxygen Transmission Rate |
ASTM D-3985 |
<0.01 cc / 100 sq in / 24 hrs |
Sulfur Transmission Rate |
AT&T Testing |
0 / 0.001" thickness / 10 years |
Chlorine Transmission Rate |
DuPont Testing |
0 / 0.001" thickness / 10 years |
Ozone Transmission Rate |
AT&T Testing |
0 / 0.001" thickness / 10 years |
Moisture Vapor Transmission Rate (MVTR) |
ASTM F-1249 (post flex) |
<0.001 gm / 100 sq in / 24 hrs (tested on bags, not film) |
ELECTRICAL PROPERTIES
Static Decay Rate |
ASTM 101C Method 4046.1 |
<0.03 seconds |
Surface Resistivity Outer Surface Inner Surface |
EOS/ESD D-11.11 EOS/ESD D-11.11 |
< 1011 (< 1012 /Sq ) < 106 (< 107 /Sq ) |
Humidity Independence |
Intercept Inner Layer ASTM D-257 |
< 1 decade SR change from <5% RH to >95% RH |
EMI Attenuation (1-10 Ghz.) |
Mil B-81705-C |
>45 dB |
Capacitive Probe |
EIA 541 Appendix E |
< 8 volts |
Charge Generation |
Modified Incline Plane |
Teflon: -0.09 avg nC/sq in Quartz: +0.10 avg nC/sq in |
CHEMICAL PROPERTIES
Outgassing |
NASA Specification |
Pass (0.070%) |
Non-Volatile Residue |
NASA Specification |
Pass (Intercept Inner Layer) |
Polycarbonate Compatibility |
EIA 564 |
Pass |
Corrosion Protection Ferrous Metals Non-Ferrous Metals Galvanic Couples |
|
(Preferential and Sacrificial) Prevents corrosion Prevents corrosion Prevents corrosion |
Important: While the information contained herein results from extensive testing on these materials, accuracy and reliability or such tests cannot be guaranteed, thus requiring limits on warranty. User assumes all liability regarding damage or loss arising from use of product. User shall determine the appropriateness of these materials for intended application and assumes total liability in the event of aforementioned damages.
Phone (847) 821-8280 Fax (847) 821-8260